![]() ![]() When you extrude a profile along a path, the profile follows the shape of the path, even if the path does not intersect the profile. This page has been translated for your convenience with an automatic translation service. SeeĬonstrain a Design with Formulas and Equations. For best results, use object snaps to make sure that the path is on or within the boundary of the object being extruded. Solved: extrude along a path, keeping the centerline - Autodesk Community - AutoCAD. When you select the extruded object, the position of the taper grip is the correspondent point of the dynamic input origin on the top face of the extrusion.Įnter a formula or equation to specify the extrusion height. The dynamic input origin should be placed on the extruded shape, on the projection of the point to the shape. You can also drag the cursor to adjust and preview the height of the extrusion. The taper angle is the distance between the two specified points.ĭrag the cursor horizontally to specify and preview the taper angle. Specifies the taper angle based on two specified points. Specifies the taper between -90 and +90 degrees. When an arc is part of a tapered extrusion, the angle of the arc remains constant, and the radius of the arc changes. Individual loops of a region are always extruded to the same height. After the extrusion, the original objects are deleted or retained, depending on the setting of the DELOBJ system variable. Select the object or edge subobject to use as the path. Experiment: What happens when you extrude a line along a line Try. Find Select the objects or edge subobjects to extrude. Then create a lofted object (using the default setting) to look like this. ![]() Extra Practice: Copy this drawing that shows the dimensions on the left and an isometric view for reference. Specifying a large taper angle or a long extrusion height can cause the object or portions of the object to taper to a point before reaching the extrusion height. Start with a 3DPolyline (3DPOLY) and then extrude the circle along the path of the polyline. All selected objects and loops are tapered to the same value. The default angle, 0, extrudes a 2D object perpendicular to its 2D plane. Positive angles taper in from the base object. ![]()
0 Comments
Leave a Reply. |